IDAutomation.com, Inc. IDAutomation.com, Inc.
Guide

How to print MICR checks

A practical checklist for printing checks that banks can read, based on IDAutomation’s MICR font documentation.

Four steps to a readable MICR line

  1. Choose the fontUse MICR E13B for the United States and Canada, or CMC-7 for Mexico, France, Spain and most Spanish-speaking countries.
  2. Set it to 12 pointsTrueType and PostScript fonts scale, but banks can only recognize them printed at exactly 12 points.
  3. Use MICR toner and stockHigh-quality MICR toner is recommended, with check stock that meets Check 21 imaging standards.
  4. Verify and calibrateA placement gauge checks position, print intensity and spacing; the E13B package includes calibration software.

If a bank cannot read your checks

  • Check placement, print intensity and spacing with a MICR E13B placement gauge.
  • Try a different font version. The E13B package includes 24 versions, with calibration software for printers that are out of alignment.
  • Review the MICR font placement guidelines, which are compiled from ISO standards for MICR E-13B fonts and released after you purchase the license.
  • Print with high-quality MICR toner. Order MICR toner or supplies (opens in a new tab).

Disclosure: some links to partner stores are affiliate links. IDAutomation may earn a commission if you buy through them, at no extra cost to you.

Test before you buy

Download evaluation fonts to check your printer setup.

Download demo fonts